Select Your Currency

Skip to Main Content »

Category Navigation:

Make Your Own -  Art Deco Ring Kit (P0024)

Click on above image to view full picture

More Views

Make Your Own - Art Deco Ring Kit (P0024)

Email to a Friend

Availability: In stock


Log In to turn on One Click Checkout


Quick Overview

Make Your OwnTM - Art Deco Ring Kit (P0024) 

Glass cabochons

Special glue


Make Your OwnTM - Art Deco Ring Kit (P0024) 

Makes 6 glass rings - includes graphics and special glue

•	Clear glass tile cabochon - circle, 20mm or 30mm
•	Clear glass tile cabochons - oval, 20x30mm or 18x25mm
•	Clear glass tiles cabochons - square, 15mm or 16mm
•	Clear glass tile cabochons - circle, 12mm or 14mm
•	Ring Blanks x4
•	Ring Trays x2
•	Glue
•	Images
•	Sandpaper


1. You can use the images supplied, or choose downloadable Glaze images 
from or
print your own images onto Heavyweight Matte Photo Paper or similar using a colour laser or inkjet printer.

 2. Thinly spread the glue on the images on your printout (one at a time) and carefully place your glass tile (wrong side down) on top of the image.
Slide the glass tile around in a circular motion over the image to spread the Diamond Glaze
and remove any bubbles, then press firmly to bond with the glaze.
Do not attempt to move the glass once it has started bonding.

 3. Leave for a few hours to dry, then cut image to shape of glass, using scissors.

 4. Gently sand any rough edges. With a sharp knife carefully scrape off any excess
glue from around the edges of the glass tile.

 5. All rings except the Tray Rings:
First create a protective resin dome - apply the glue carefully to the back of your image.
Start from the inside and gently spread outward, being careful not to tip the glass tile
(Hint: use blutack to secure your image to the table) to create a doming effect. Note that the glue
works by capillary action – in other words – it will only run down the side of your glass tile if you allow it to run in that direction – it should stay only on the face of the tile you are working on. After waiting for the glue to dry (allow 12-72 hours), using a couple of drops of the glue, glue the ring blank
to the resin on the back of the glass tile. Leave to set for a few hours before wearing.

 6. Tray Rings: Simply place a drop of the glue in the tray and gently press the glass tile inside
(no need to create a protective dome). Wipe any excess glue off the glass and tray with a damp cloth.
This can be worn straight away!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

subscribe now

You're currently on: